How to repair scratched leather quickly?

If you have a leather armchair, I'm pretty sure that there should be some scratches on it. Those scratches might have been made by your cat, or your kids or yourself. There are no way to completely avoid them. So how to overcome the problem? Of course you don't wanna buy a new one every time when the armchair got too many of scratches. You also cannot live without your beloved cat. Ok, so let's follow the step-by-strep guide of Kara S below to repair it yourself. It might take you $90 for buying materials and 2 days to finish, but it's easy and worthy. Let's have a look! 

Tools and Materials:

  • Beat up leather furniture
  • Repair compound kit (I used one from Heirloom Traditions Paint. This kit has everything you need to repair leather)
  • Frog tape
  • Sandpaper

1. Prep your piece

Tape of the wood

Lay down a drop cloth to make sure that no paint gets on the floor under the chair. Tape off any wooden parts of the chair. I taped off the legs with Frog tape. This makes it easier to paint without having to worry about accidentally getting some on the wooden parts of your couch.

Then I cleaned my chair. I used a repair kit from Heirloom Traditions Paint which came with a cleaning compound. This compound gets rid of any debris, dust, build-up, or dirt. I wiped down the entire chair with the compound and then I was ready to address the cat scratches.

2. Repair


Take a look at your piece. If there are deep scratches where the leather has peeled up a bit, take a piece of fine grit sandpaper and knock down any bits that might get stuck in the paint.
Spread it on

Using the Bond-N-Flex product and the scraper tool, I spread a layer of the material over the part of my chair with the scratches. Make sure to layer it on thick enough to cover all of the holes so that you don’t have to do this step twice. Be liberal with the product and make sure to really get it in there.

3. Smooth


I wet my glove a bit and smoothed down the surface to make sure that there were no bumps or ridges. This is important because if there are any imperfections they will show when you paint the color on in the next step. 
Smooth with your hand

Once I had smoothed everything out I let it dry completely.
Let it dry

Sand it down
Using 120 grit sandpaper I knocked down any bumps or raised bits of Bond-N-Flex. This step is super important to make sure that the leather is as smooth as possible. This will help you get that supple leather feel that we’re going for.

4. Paint

Shake the paint

Using the Restore Coat Flex Paint from the kit I have, I painted the chair, starting with the damaged parts. Make sure to mix it up really well before you start painting.

Paint it on
I painted the chair with an even coat of the Restore Coat Flex Paint. Because my chair is dark and this paint is light, I needed to apply a few coats of paint to get an even color.

Get the cracks
Make sure to get in all of the cracks and creases of the leather. And yes, you need to paint the entire chair! This is a great way to make the color match your decor a bit better if it didn't already. It may take you a day or two, but this is a great weekend project.

Smooth with a brush roller
Once I had applied a few coats I used a paint roller to roll out the paint. This got rid of any brush strokes from painting with the brush. Do this a few times until you get a good, even coat on the whole chair.
Don't miss any spots
After being repaired

And here we go
Then let it dry and you’re done! This is a great way to not only fix up a damaged chair, but to also change up your decor a bit if you are looking for a new vibe. Have you ever repaired damaged furniture? Let me know in the comments below!